Module 1/2

The drive assembly

Rear Lobro joints during assembly

Inserting the rear drivebar: I had to release the bolts on the lower wishbone and swing the upright clear.

The drivebar is bolted to the diff, we can't torque-tighten the bolts until the handbrake is working

Rear disk brakes fitted, front ones were pre-assembled, now we're ready to feed the handbrake cable through

Handbrake, cable & compensator bracket attached, clevis pin inserted, viewed from underneath. We secured the handbrake cables to the chassis using heavy duty electrical cable ties.

(Send E-Mail to Paul)

Rear Lobro joints during assembly
Inserting the rear drivebar: I had to release the bolts on the lower wishbone and swing the upright clear.
The drivebar is bolted to the diff, we can't torque-tighten the bolts until the handbrake is working
Rear disk brakes fitted, front ones were pre-assembled, now we're ready to feed the handbrake cable through
Handbrake, cable & compensator bracket attached, clevis pin inserted, viewed from underneath. We secured the handbrake cables to the chassis using heavy duty electrical cable ties.